How install AC detailed?

How install AC detailed?

Blog Article

The installing of the split air conditioners is an essential job. If the installation is completed accurately your air conditioner gives optimum cooling, but when it is not done properly you won't get the specified cooling effect. An undesirable installations also results in frequent maintenance problems.

Several factors need certainly to considered during the installation of split air conditioner.
1. Strength of wall to hold the AC

The indoor unit of split AC must certanly be installed on a wall strong enough to put on the unit's weight.
2. Proper spacing between wall and AC unit

The indoor unit of split AC requires at least 15 cm of open space surrounding its top and sides for proper air flow.
3. Appropriate installation height from ground

Mount the indoor unit of split AC at a height of 7-8 feet above the bottom for adequate cooling inside the space
4. Correct tilt angle of indoor unit

While fixing the aluminum bracket on wall ensure that the bracket is given a small tilt angle, so that the indoor unit of split AC, when fitted is also at a slight angle allow unrestricted flow of the condensed water from the drain pipe.
5. Correct location of outdoor unit

For proper cooling, mount the indoor and outdoor units of split AC at location away from sunlight and water. Install the outdoor unit of split AC in open space so that there's no hindrance to the heat dissipated from the condenser.

6. Proper keeping of outdoor unit

The outdoor unit of split AC should be added to a set and rigid surface. This unit contains key the different parts of split AC like compressor, condenser, fan motor etc. If the unit isn't on a flat working surface then it will vibrate excessively, which could result in the breakage of copper pipes, coolant leakage and compressor/condenser damage. Further, the vibrating unit makes lots of noise which may disturb you and your neighbors.

Click here to obtain more information about ac installation orlando fl.

Report this page